Step-by-Step: Changing IP Addresses and Network Settings with BRAdmin Light
Managing a fleet of networked printers can be challenging. Brother simplifies this process with BRAdmin Light, a powerful tool designed for initial network configuration. This guide provides a straightforward approach to changing IP addresses and network settings using BRAdmin Light. Step 1: Download and Install BRAdmin Light
Before configuring your devices, you must install the software on a computer connected to the same local network as your printers. Visit the official Brother support website. Search for your printer model’s download page. Select your computer’s operating system. Download the BRAdmin Light utility. Run the installer file. Follow the on-screen prompts to complete installation. Step 2: Discover Network Devices
Once installed, the utility must locate the Brother printers on your local area network (LAN). Open the BRAdmin Light application. The software automatically scans your subnet. Wait for the device list to populate. Click Refresh if your printer does not appear.
Locate your target printer via its node name or MAC address. Step 3: Access Device Network Configuration
To modify settings, you must open the configuration panel for the specific printer. Highlight the target printer in the device list. Click on the Control menu at the top. Select Network Configuration from the dropdown. Enter the device password if prompted.
Note: The default password is often access or located on the back of the printer. Step 4: Change the IP Address and Network Settings
You can now change the network assignment type and input the new network parameters. Locate the IP Config or Boot Method tab.
Change the setting from AUTO or DHCP to STATIC (or STATIC/MANUAL). Type the new, unique IP Address into the designated field. Enter your network’s Subnet Mask (typically 255.255.255.0).
Input the Gateway Address if routing outside the local subnet is required. Step 5: Save and Apply Changes
The printer requires a quick restart of its network card to apply the new configuration. Click the OK or Submit button to send data. Wait for the confirmation dialog box to appear. The printer will temporarily disconnect from the network. Allow 1 to 2 minutes for the network card to reboot.
Click Refresh in BRAdmin Light to verify the new IP address.
To ensure I provide the most relevant follow-up information, let me know: What operating system is your computer running? What specific model of Brother printer are you configuring?
Are you setting up a single printer or managing a large fleet?
I can provide troubleshooting steps for common connection errors if you run into any issues.
Leave a Reply